Set up Stripe Reader the related setting/the related setting
Learn how to set up Stripe Reader the related setting/the related setting.
the related setting available in:
the related setting available in:
Stripe Reader the related setting/the related setting is an Android-based smart reader for countertop and handheld use. You can customize the on-reader checkout UI using a suite of pre-built and custom elements.
The Stripe Terminal SDK connects to the reader over the internet, LAN, or handoff mode.
This reader is compatible with the following integrations:
- Server-driven
- JavaScript SDK
- iOS SDK (the related setting requires v4.7.3 or later)
- Android SDK (the related setting requires v3.8.0 or later)
- React Native SDK (the related setting requires v0.0.1-beta.28 or later)
For Stripe Reader the related setting/the related setting, we recommend the server-driven integration, which uses the Stripe API instead of a Terminal SDK. To view the reader’s parts and features, see the Stripe Reader the related setting product sheet or Stripe Reader the related setting product sheet.
Turn the reader on and off
Connect the reader to power by plugging the provided USB-C cable into the port on the left side of your reader. Connect the opposite end of the USB-C cable to the provided power adapter and plug it into a power outlet. The Stripe Reader the related setting/the related setting requires a recommended 12W of power to operate properly. Stripe power adapters and cables are recommended for the charging and operation of the the related setting/the related setting and its accessories. Using alternative power adapters or cables might result in failure modes including inadequate the related setting/the related setting charging, and might invalidate your product warranty.
Stripe Reader the related setting/the related setting
After the reader is fully charged, hold down the power button on the right side until the screen turns on. After the device powers on, press the power button to sleep or wake the device. To fully power off the device, hold down the power button until the power off option appears on the screen, then select it.
In a countertop deployment, leaving the device on for extended periods is expected. With a full charge, you can expect the battery to last about 15 hours.
Even when not in use, leave Stripe Reader the related setting/the related setting plugged in and powered on to receive automatic software updates.
Access settings
To open the settings menu, swipe right from the left edge of the reader screen. Tap Settings and enter the admin passcode 07139. From here, you can update your WiFi settings or generate a pairing code for device registration. The battery status displays at the top right of this screen. To close the settings menu, click the back arrow in the top left corner.
Settings button
Admin PIN screen
Settings menu
Screen timeout
The screen times out when the reader isn’t connected to a power source. The default timeout of 1 hour improves battery performance. To update this value, go to the settings, select Appearance, then select a new screen timeout from the dropdown. The device screen turns on automatically after a device interaction occurs (such as touching the screen or picking up the device), or when the device enters the payments flow and a payment is initiated.
Settings menu
Appearance menu
Timeout menu
Connect the reader to the internet
Because the Stripe Reader the related setting/the related setting is a smart reader, its reader software communicates directly with Stripe. Your point of sale application communicates with the reader through either a LAN (using a Terminal SDK) or the internet (using the server-driven integration). When communicating with the reader through the LAN, the reader must connect to the same local network as your point of sale application. If you’re running into issues connecting your reader to the internet, follow the troubleshooting steps to diagnose the issue.
WiFi
To connect to WiFi or switch networks, go to settings, then select WiFi settings to choose the network and connect. Attempting to join a new network disconnects the reader from any existing wireless connection. Learn more about our network requirements and how to configure advanced network settings for supported WiFi networks.
Ethernet and USB Peripherals
Ethernet connectivity requires an optional hub, which provides wired 10/100 Ethernet connectivity and allows your smart reader to remain fully charged with the included charging cable. The hub also provides two USB-A ports to connect peripherals such as a barcode scanner and printer. The hub is compatible with the the related setting/the related setting Dock for countertop applications. You can purchase the hub and dock separately in the Stripe Dashboard.
To set up the hub:
- Connect the Ethernet cable from your hub to your router.
- Connect the hub to power through the built-in USB-C cable. We recommend using the power adapter included with your Stripe Reader the related setting/the related setting to make sure the appropriate power is provided to the hub (27W) to power the reader and attached peripherals.
- Connect the USB-C cable (provided with Stripe Reader the related setting/the related setting) to the hub and reader when both cables are in place. The right-angle USB-C connector connects to the reader.
To confirm the reader’s Ethernet connectivity, verify that the reader is charging and check if the Ethernet icon is visible in the status bar.
Charging icon
Ethernet icon
The reader obtains an IP address using the related setting. As soon as the network cable is plugged in, the reader attempts to establish communication with Stripe.
Hub when used with Dock (sold separately)
Hub with peripherals. Ethernet connected and power connected to Stripe Reader the related setting/the related setting.
For more information about these accessories, see Stripe Reader the related setting/the related setting accessories.
Cellular
Stripe Reader the related setting supports cellular connectivity in addition to WiFi and Ethernet. See Configure the cellular network for more details.
Network priority
The Stripe Reader the related setting/the related setting prioritizes connecting through Ethernet if possible. Even if previously configured for WiFi, the reader switches to using an Ethernet connection when connected to the dock with a plugged-in Ethernet cable. If you remove the reader from the dock, it switches back to the WiFi connection.
If you dock the reader, but you don’t have an Ethernet cable plugged in, it uses WiFi. Regardless of connectivity while docked, you can still connect to WiFi and manage networks on the device.
For cellular-enabled Stripe Reader the related setting devices, the reader prioritizes network connectivity in the following order: Ethernet, then WiFi, then cellular. This is managed at the Android level so no direct network management is necessary. To learn how network transitions affect payment processing and the SDK connection, see Network transitions on cellular readers.
Change the UI appearance
By default, the user interface of your Stripe Reader the related setting/the related setting reader uses a light theme.
Welcome screen
Payment screen
Processing screen
Approved screen
You can change the appearance of the UI to use a different theme in the settings menu. Go to settings, then select Appearance, and select a new theme from the dropdown.
Settings menu
Appearance menu
Theme menu
Change the default reader language
Stripe Reader the related setting/the related setting supports changing the reader language in the reader settings menu. Swipe right across the screen to access the settings menu, and select your language.
Design your own accessories
You can design your own accessories for the Stripe Reader the related setting/the related setting. To download the Stripe Reader the related setting/the related setting mechanical design files (.STP), you must first review and accept our Terminal Design File License Agreement. By downloading the file below, you agree to the terms outlined in the license.
Custom mounting attachment
If you’re interested in designing your own custom mounting attachment, see the Stripe Reader the related setting/the related setting Accessory Design Guidelines.